RTFQ-1100
ruiting
8441100000
| Machine size: | |
|---|---|
| weight: | |
| PDF Export | |
1. Description:
1) One photoelectric eye for web guide
2) Unwind and rewind with magnetic brake and clutch
3) 8 sets knife for slit paper or plastic film
4) 3 inch air shaft for both unwinding and rewinding
2. Main Technical Specification:
Max web width | 1100mm |
Max rewinding diameter | 500mm |
Max. unwinding diameter | 500mm |
Min width | 25mm |
Total power | 3.6kw |
Cutting precision | 0.2mm |
Mechanical speed | 10-180m/min |
Slitting speed | 10-160m/min |
Overall dimensions(L*W*H) | 2.4*1.2m*1.5m |
Machine weight | 1300kg |
1. Host part: 1. The main structure of the equipment adopts cast iron and steel plate structures (the castings are secondary processed and finalized)
2. The spindle drive roller is made of rubber roller (NBR) and dynamic balance processing.
3. The main pressure roller of the spindle drive is a rubber roller (NBR)
4. The material passing guide rod is a metal rod (made of aluminum alloy)
5. The transmission mode of the main machine and material collection is synchronous wheel and synchronous belt transmission.2. Unloading mechanism part:
1. The unloading mechanism is a one-piece unloading rack
2. Install the movable support, the moving device is a ball screw
3. Equipped with 1 set of offset adjustment device, which can be fine-tuned left and right, front and back through the hand wheel
4. The unwinding tension actuator is Huaqiang brand magnetic powder brake
5.. Deviation correction is controlled by PLC to achieve edge and line following effects on materials.
3. Rewinding mechanism part: 1. The rewinding shaft is equipped with 2 air-expansion shafts, which are controlled by magnetic powder. 2. The locking method adopts pneumatic control 3. The winding tension is controlled by magnetic powder 4. The winding pressure roller can be customized according to customer requirements
5. The cutter adopts pneumatic control and is equipped with 10 cutter holders and manual fine adjustment (10 flat knives) 6. Equipped with 1 set of waste blowing device4. Electrical mechanism part: 1. The host frequency conversion adopts 1 Taiwan Delta frequency converter. 2. 1 main variable frequency motor 5. Frequency converter analog control, synchronous motor drive, ultrasonic photoelectric control 6. Microcomputer is used to achieve precise and stable control functions. The conversational parameter setting environment allows you to start the operation without complicated settings. Parameters such as diameter and speed are automatically calculated by the computer.
1. Description:
1) One photoelectric eye for web guide
2) Unwind and rewind with magnetic brake and clutch
3) 8 sets knife for slit paper or plastic film
4) 3 inch air shaft for both unwinding and rewinding
2. Main Technical Specification:
Max web width | 1100mm |
Max rewinding diameter | 500mm |
Max. unwinding diameter | 500mm |
Min width | 25mm |
Total power | 3.6kw |
Cutting precision | 0.2mm |
Mechanical speed | 10-180m/min |
Slitting speed | 10-160m/min |
Overall dimensions(L*W*H) | 2.4*1.2m*1.5m |
Machine weight | 1300kg |
1. Host part: 1. The main structure of the equipment adopts cast iron and steel plate structures (the castings are secondary processed and finalized)
2. The spindle drive roller is made of rubber roller (NBR) and dynamic balance processing.
3. The main pressure roller of the spindle drive is a rubber roller (NBR)
4. The material passing guide rod is a metal rod (made of aluminum alloy)
5. The transmission mode of the main machine and material collection is synchronous wheel and synchronous belt transmission.2. Unloading mechanism part:
1. The unloading mechanism is a one-piece unloading rack
2. Install the movable support, the moving device is a ball screw
3. Equipped with 1 set of offset adjustment device, which can be fine-tuned left and right, front and back through the hand wheel
4. The unwinding tension actuator is Huaqiang brand magnetic powder brake
5.. Deviation correction is controlled by PLC to achieve edge and line following effects on materials.
3. Rewinding mechanism part: 1. The rewinding shaft is equipped with 2 air-expansion shafts, which are controlled by magnetic powder. 2. The locking method adopts pneumatic control 3. The winding tension is controlled by magnetic powder 4. The winding pressure roller can be customized according to customer requirements
5. The cutter adopts pneumatic control and is equipped with 10 cutter holders and manual fine adjustment (10 flat knives) 6. Equipped with 1 set of waste blowing device4. Electrical mechanism part: 1. The host frequency conversion adopts 1 Taiwan Delta frequency converter. 2. 1 main variable frequency motor 5. Frequency converter analog control, synchronous motor drive, ultrasonic photoelectric control 6. Microcomputer is used to achieve precise and stable control functions. The conversational parameter setting environment allows you to start the operation without complicated settings. Parameters such as diameter and speed are automatically calculated by the computer.
