China supplier 1400 width A4 copy paper non woven fabric roll to sheet cutting machine

Max. Cutting width

1400mm

Max.diameter of material

Φ1100mm

Min.width of cutting

50mm

Power Supplier

16kw

Cutting precision

±0.2mm

Fixed speed

20-200times/min

Length cutting 

200-1500mm

Overall dimensions(L*W*H)

6000*2200*1400mm

Machine weight

4700KG

This machine is suitable for cutting large roll packaging materials such as paper, self-adhesive, paper-plastic composite material, color printing composite material, non-woven fabric, etc. This machine adopts servo motor to control fixed length cutting. The transmission system adopts centralized control such as pneumatic and photoelectric sensors. This machine integrates light, electricity and gas, easy to operate, high cutting precision, mechanical stability, and low noise. (Pneumatic feeding is optional) Motor frequency control, automatic counting, alarm stop, automatic adjustment of magnetic powder taper tension function. It is currently the ideal equipment for cutting large-scale coils with high quality in China.

3.Machine Features:

1. Host frequency conversion speed regulation, Panasonic PLC touch screen control system, automatic counting, automatic fixed length, alarm stop, automatic control and other functions

2. The frame adopts a 16mm steel plate structure, the cross-cutting tool holder adopts a heavy casting structure, and the guide roller adopts a dynamic balance treatment aluminum alloy guide roller

3. The drive positioning traction adopts the servo system drive shaft structure, and the feeding traction method is that the motor drives the sprocket to drive the traction rubber shaft.

4. This machine is an ideal cross-cutting equipment, with high precision, fast speed and smooth material collection.

Receiving part:

(1) Receiving platform to receive materials. Behind is equipped with baffle to facilitate neatness,Or choose conveyor belt, automatic paper receiving and feeding

(2) Add gas function.

(3) The traction rubber roller is made of polyurethane material, which has high wear resistance

Host part:

The frame adopts 16# high-quality steel plate structure

一)Traction device:

(1) Structure type: active traction passive compression type

(2) The traction base adopts casting structure (1 set)

(3) The traction roller adopts rubber roller (specification: 4 φ85×1150mm)

(4) The compression method adopts cylinder control

(5) The driving guide roller adopts aluminum guide roller (specification: 8 φ75×1150mm)

(6) The driving guide roller can be tensioned up and down

(7) The motor adopts a three-phase asynchronous variable frequency motor 1.5KW (Shanghai Dedong) (1 unit)

(8) The frequency converter adopts GETEC 1.5kw (1 unit)

(9) Feeding adopts floating arm mechanism for buffer storage.

(10) Floating up and down tension adopts pneumatic traction method

(11) Floating guide roller: aluminum guide roller (specification: 3 φ75×1150mm)

(12) The entire feeding mechanism is intelligently controlled by the displacement sensor.

Unwind :

1. Actively adopt servo control positioning method

2.3kw INVT servo motor, driver (1 set)

3. The industrial control system of the whole machine adopts the driving method of digital industrial control system: the main motor drives the active roller positioning

4. The transmission adopts synchronous belt and synchronous wheel transmission mechanism

5. The feeding roller adopts light rubber roller structure

Cutting system:

(1) Cutting method: the lower knife is fixed, and the upper knife actively cuts

(2) The knife seat adopts heavy-duty casting structure:

(3) Linear guide rail (2 pairs)

(4) Oil container (2 pieces)

(5) Lubricating oil can be recycled

(6) The upper and lower knives adopt strip knives and imported balanced front steel knives

(7) Cutting tool (specification thickness × width × length: 15 × 80 × 1150mm) (Shanghai joint venture)

(8) Operation mode: manually adjust the knife position

(9) Main transmission mode: the main motor drive matches the speed changer to drive the eccentric wheel linkage connecting rod to reciprocate the cutter

(10) The main motor adopts frequency conversion speed regulation motor Shanghai (1.5kw)

(11) The frequency converter adopts Jitaike (1.5kw 1 set)

(12) The transmission adopts synchronous wheel transmission mechanism

(13) Eccentric wheel (2 sets)

(14) Connecting rod (2 pieces)

(15) The feeding device adopts; independent feeding rack

(16) Inflatable shaft 3 inches 1 piece

(17) Magnetic powder 10 kg 1 set

(18) Cylinder 160mm 1 pair

(19) 40mm 1 pair of cast steel for discharging archway

Electrical control part:

Control and host part conjoined parallel control) The whole machine adopts Panasonic PLC industrial control system control touch screen adopts Taiwan Weilun)

(1) The control system of the machine is roughly controlled by the main engine.

(2) Host control: including main motor control, traction control, feeding control, and cutting control.

(3) Floating control: Wide speed range, good performance regardless of low speed or high speed.

(4) It is equipped with an electronic meter counting device; an alarm to stop the machine; automatic fixed length, point-in and point-out functions.

(5) Chint is used for the above electrical components; Schneider brand is used for switches