RTFQ-1600
ruiting
8441100000
| Machine size: | |
|---|---|
| weight: | |
| PDF Export | |
1. Material type: PET, BOPP, PE, self-adhesive, paper, aluminum foil, printing composite and other roll materials;2. Material thickness: 0.012-0.1mm (film)3. Maximum diameter of raw material: 1400mm4. Raw material core: 3# paper tube;5. Maximum width of raw materials: 1600mm;6. Minimum width of raw materials: 200mm;7. Roller surface width: 1650mm;Cutting width: 25-1600mm
2. Rewinding tube core: 3# paper tube;10. Maximum rewinding diameter: 600mm;11. Total deviation correction stroke: 150mm;12. Correction accuracy: ±0.15mm13. Maximum speed: 300 meters/min;14. Cutting speed: 10---300 m/min;15. Total power of power supply: 23KW;16. Total weight: about 3800KG;17. Overall dimensions: length 5800mm, width 3000mm, height 1700mm;18. Slitting tools: 10 sets of round knives19. Rewinding shaft: Equipped with 2 air expansion shafts, which can be used repeatedly.The entire equipment is equipped with Φ90 aluminum roller.
(1) Unwinding part:1. The unwinding adopts shaftless cone top, which is convenient for one person to operate. Adopting a special cone top form, it will not damage the inner wall of the tube core. 3-inch mechanical expansion sleeve locking device, strong and durable. Left and right, separated at the same time, the clamping operation is extremely convenient.2. The unwinding diameter is automatically detected by the proximity switch at the unwinding transmission shaft. There is no need to input the material thickness. The unwinding residual diameter can be set to automatically decelerate and stop to facilitate the splicing of the next roll.
3. It is equipped with a mechanism for manually adjusting the elastic edge of the material release. The adjustment range is ±20mm.4. The material is automatically corrected by the simulated automatic correction system. The entire frame uses guide rails to move left and right, and the moving part uses a threaded screw. The movement is driven left and right by a servo motor to achieve automatic correction.5. It is equipped with a pneumatic material receiving platform, using pneumatic material pressing, square steel structure, and rubber skin pressing material to reduce material scrapping.6. The material discharging adopts corridor type feeding, which makes the operation easier.7. The unwinding adopts magnetic powder braking.(ii) Traction part:The mirror traction roller is driven by a 7.5KW servo motor.(iii) Waste edge recycling device:A fan is used to blow out the waste materials, and the customer provides a cage for collection.(IV) Rewinding mechanism: (The left or right end of the finished product is decided by the customer when ordering)1. Use left and right double shafts to independently wind up the cut material.2. Each of the left and right rewinding reels has a 7.5KW servo motor to drive the air expansion shaft. The rewinding tension is based on the current roll diameter. The PLC automatically controls the SMC electrical, so that there is no material thickness factor when cutting multiple strips, and all reel end faces Smoothness, the flatness of the disk surface is freely switched between the pneumatic pressure roller and the self-weight pressure roller. The tightness of the inner and outer layers of the finished roll is controllable, that is, the spiral winding method. As the winding diameter continues to increase, the PLC automatically controls the speed of the winding servo motor to decrease, which greatly extends the life of the air expansion shaft.
1. Material type: PET, BOPP, PE, self-adhesive, paper, aluminum foil, printing composite and other roll materials;2. Material thickness: 0.012-0.1mm (film)3. Maximum diameter of raw material: 1400mm4. Raw material core: 3# paper tube;5. Maximum width of raw materials: 1600mm;6. Minimum width of raw materials: 200mm;7. Roller surface width: 1650mm;Cutting width: 25-1600mm
2. Rewinding tube core: 3# paper tube;10. Maximum rewinding diameter: 600mm;11. Total deviation correction stroke: 150mm;12. Correction accuracy: ±0.15mm13. Maximum speed: 300 meters/min;14. Cutting speed: 10---300 m/min;15. Total power of power supply: 23KW;16. Total weight: about 3800KG;17. Overall dimensions: length 5800mm, width 3000mm, height 1700mm;18. Slitting tools: 10 sets of round knives19. Rewinding shaft: Equipped with 2 air expansion shafts, which can be used repeatedly.The entire equipment is equipped with Φ90 aluminum roller.
(1) Unwinding part:1. The unwinding adopts shaftless cone top, which is convenient for one person to operate. Adopting a special cone top form, it will not damage the inner wall of the tube core. 3-inch mechanical expansion sleeve locking device, strong and durable. Left and right, separated at the same time, the clamping operation is extremely convenient.2. The unwinding diameter is automatically detected by the proximity switch at the unwinding transmission shaft. There is no need to input the material thickness. The unwinding residual diameter can be set to automatically decelerate and stop to facilitate the splicing of the next roll.
3. It is equipped with a mechanism for manually adjusting the elastic edge of the material release. The adjustment range is ±20mm.4. The material is automatically corrected by the simulated automatic correction system. The entire frame uses guide rails to move left and right, and the moving part uses a threaded screw. The movement is driven left and right by a servo motor to achieve automatic correction.5. It is equipped with a pneumatic material receiving platform, using pneumatic material pressing, square steel structure, and rubber skin pressing material to reduce material scrapping.6. The material discharging adopts corridor type feeding, which makes the operation easier.7. The unwinding adopts magnetic powder braking.(ii) Traction part:The mirror traction roller is driven by a 7.5KW servo motor.(iii) Waste edge recycling device:A fan is used to blow out the waste materials, and the customer provides a cage for collection.(IV) Rewinding mechanism: (The left or right end of the finished product is decided by the customer when ordering)1. Use left and right double shafts to independently wind up the cut material.2. Each of the left and right rewinding reels has a 7.5KW servo motor to drive the air expansion shaft. The rewinding tension is based on the current roll diameter. The PLC automatically controls the SMC electrical, so that there is no material thickness factor when cutting multiple strips, and all reel end faces Smoothness, the flatness of the disk surface is freely switched between the pneumatic pressure roller and the self-weight pressure roller. The tightness of the inner and outer layers of the finished roll is controllable, that is, the spiral winding method. As the winding diameter continues to increase, the PLC automatically controls the speed of the winding servo motor to decrease, which greatly extends the life of the air expansion shaft.
